We can also perform all types of repair and/or full replacement of hardwood floor as necessary. This would include parquet, strip or specialty type of flooring. Our professional and courteous staff would estimate all of these services at your request.

Wood floors by classic Inc is constantly researching new products and techniques to ensure the highest quality finish which technology affords to our craft. We use advanced finishing agents to help speed the drying process and new state of the art sanders to ensure a quality finish. As new products are developed, you can count on Wood floors by classic inc to stay ahead of the curve and bring them directly to our clientele! We replace our sanding equipment twice as often as most of our competitors, thereby insuring that our crews are using the most advanced and reliable machines available. By maintaining our vans with the best equipment and craftsmen, we are confident that your hardwood floors will look their best

Installation of hardwood floors planks, strips and parquet – mosaic from new and recycled wood, on sub floors from wood or concrete and concrete with wood (plywood or sleepers – various thicknesses and widths, as needed); also, installation of acrylic impregnated hardwood floors.
Installation of standard and custom – made hardwood floors or based on our suggestions.
Installation of solid and laminated wood floors– unfinished and prefinished = square or beveled (micro or full) edges/ends – plain, rift, or quarter sawed – install by 3 methods (nailed – stapled, glued, floating).
Installation of hardwood floors if different grades, thicknesses (5/16”, 3/8”, ½”, ¾”, 33/32” and others), widths (including random patterns), lengths (including random patterns).
Installation of hardwood floors from a variety of woods: Amazon-exotics, ash, beech, birch, cherry, hickory, mahogany, Brazilian cherry, maple, pine, poplar, purple, red cedar, red oak, teak, walnut, white oak and others.
Installation of decorative strips, borders, medallions, patterns, inlays, below-grade installation, and installation of pegs (walnut, oak, etc.)
Installation of radiant wooden heat vents set flush into floor, with or without damper, and radiant wooden heat vents dropped in, with or without damper – all woods and sizes.
Installation and exchange - all kinds and woods - of base-shoe - quadrant, baseboards, thresholds, reducers,
Repair of worn out, broken, missing or otherwise defective hardwood floors.
Filling-up and patching of floor splits, holes, and other defects.
Professional dustless floor sanding and buffing / screening with modern equipment.
Staining – all colors – by using stain brand names: Basic Coating,  Bona Kemi, Dura Seal, MinWax,
Natural color offered in several shades without staining; also possible natural color with with non-yellowing floor finish.
Finishing and refinishing by applying regular finishes and extra low-odor, quick drying, high-durability, non-yellowing finishes, such as wax, polyurethane, waterbased – all kinds:. All these finishes can be done in 3 basic sheens: gloss, semi-gloss, sating, or special sheen.
Testing subfloors for moisture / vapors and general conditions to determine if treatment with additional materials necessary for better future floor condition (testing applied during installation / replacement of floor); if necessary, we install special barrier for moisture and vapors.
Wooden stairs job: installation, repair, sanding, bleaching, staining, and finishing.
Gym floors – installation, repair, sanding, finishing (in accordance with NWFA specifications).
At additional cost, move furniture and appliances out and put back in (not covered by our insurance); also at additional cost remove old carpet, tiles and others

Professional heavy-duty drum sander and edger are used for 90% dust free. Normally hardwood floor is sanded by coarse, medium and fine sand papers and buffer to ensure the surface get enough required smoothness. Buffing is essential between coats or before the first coat, the floor must be buffed with a buffer machine in order to prepare the floor and remove any unseen scratches.

For clear finish, penetrating sealer is applied as first coat. Sealer may include a color and can be used to seal and stain the floor. Since sealer is applied right on bare wood, it will be mostly absorbed and dry in relatively short time, then another coat of polyurethane will applied. It takes about 6 to 8 hours for putting the last coat. Buffing between each polyurethane coat will be applied.

For stained floor, stain will serve as the protective sealer, drying time is depending on humidity level.

The sealer coat is vital to the durability of the finish. If a sealer is not applied, the finish will soon start to peeling. This is especially true in areas where there is big humidity variation throughout the year.

We offer customer choice of: Oil-based or water-based polyurethane; semi-gloss, high-gloss or satin finish. All our work is guaranteed to follow the guide of National Wood Flooring Association.

Should you have any questions, please feel free to contact us. Reference is available on request.